300,000+ satisfied customers
+49 61879033960
Free shipping over 29 pounds
Mould in the Bedroom
Mould in the bedroom can pose a significant health risk and severely affect indoor air quality. Mould spores can spread throughout the room and infest walls, furniture, wallpaper, mattresses, and bedding, leading to serious health issues. Home remedies are not effective in this case.
Dangers of Mould
The air quality in the bedroom is crucial for healthy sleep and overall well-being. Therefore, it is important to combat mould in the bedroom immediately and eliminate the causes of the infestation.
"By means of draft ventilation, warm air can escape and a lively air exchange in the living space can be ensured. However, these are only measures intended to improve the indoor climate. Once mould has formed, a solution is needed that addresses the problem at its root."
Molud contamination in indoor air can lead to various health problems: asthma, allergic reactions, or other respiratory diseases. Existing allergies can be worsened as a result.
Inhaling spores in a mould infested bedroom can significantly impair sleep quality, leading to fatigue and reduced performance.
The bedroom is a room where we spend a lot of time. If we are exposed to an increased concentration of mould spores here, the risk of health problems can be significantly increased.
Mould growth due to moisture
Moisture causes mould to develop and is therefore the main cause of mould formation in living spaces. Especially at night, due to sweating and the humid breath, the humidity in the room increases. If laundry is also hung up to dry in the bedroom, the moisture load increases even further. Structural defects can also cause moisture accumulation. Bedrooms are often well heated, but rarely adequately ventilated. The humid air causes condensation to settle in cool areas such as exterior walls and windows. These cold bridges significantly promote the formation of mould. A tilted window is usually not enough to effectively transport moisture outside. Regular draft ventilation is necessary to reduce high humidity to a healthy level. To remove mould, affected areas must not only be thoroughly cleaned, but the causes of moisture formation must also be eliminated.
Naturally & permanently
Mould - DRY revolutionizes mould removal. Through innovative infrared technology, the masonry is deeply dried, thereby permanently removing the moisture that causes mould. This is done entirely without the use of chemicals, making this method particularly environmentally friendly and health-compatible.
Mould - DRY is also easy to install and therefore the ideal solution for your home. Simply effective against mould fungi!
Infrared drying
Heats the wall specifically with infrared radiation, so that moisture is transported from the depths to the outside.
Eliminates moisture
Capillary-active moisture release
Activates the natural evaporation of water in the wall and prevents new moisture from coming in.
Causes persistent drought
Chemical-free mould prevention
Safe for households with children, allergy sufferers, and pets – a sustainable and healthy solution.
Healthy & environmentally friendly
Energy-efficient heating concept
The heat is specifically directed into the wall, without unnecessarily warming the room air – efficient and cost-saving.
Maximum effect + minimal costs
| Mould-Dry | competition | Chemical agents | |
|---|---|---|---|
|
Sustainable Mould Control
|
Permanent solution through wall drying |
Permanent solution through wall drying |
Kills mould temporarily without addressing the cause. |
|
Prevents new mould formation
|
Yes, by removing moisture in the long term. |
Only as long as the device is running |
No, because moisture remains. |
|
Chemical-free & health-friendly
|
100% chemical-free, safe for children & pets |
Yes, but often associated with noise & power consumption. |
Contains toxic substances, irritates respiratory tract & skin |
|
Energy consumption & costs
|
Only 45–50W, extremely efficient |
High power consumption, ongoing costs |
One-time low costs, but repeated application needed |
|
Silent & maintenance-free
|
Yes, completely silent & no maintenance needed |
Loud & requires regular maintenance |
Yes, but repeated application necessary |
|
Long-term solution
|
Yes, moisture will be permanently reduced. |
Only short-term effect, as soon as the device is off. |
No, only superficial effect |
|
Simple application
|
Plug & Play, simply attach & connect |
Often heavy & bulky, requires space |
Simply spray on, but regularly needed. |
Order directly from the manufacturer and secure 18%! Discount code: MOULD18
DISCOVER MOULD-DRY NOWYour key to a Mould-Free home
VAT included.
Base Modul
VAT included.
Best seller
VAT included.
Best value
Still questions?
Markus is here to support and advise you.
Mon - Thu: 09:00 - 16:00 PM
Fr: 09:00 AM - 01:00 PM
