FUNCTION & APPLICATION AREAS

Sustainable Mold Remover

Mold infestation can significantly affect your health and well-being at home. Our innovative solution Mold-DRY represents an effective and environmentally friendly method to combat mold in your home.

Kratz nicht an der Oberfläche!

Beseitige Schimmel nachhaltig

Our innovative infrared technology dries the walls through capillary action and ensures a permanently mold-free environment. Unlike conventional methods that only work on the surface, Mold-DRY offers a sustainable and safe solution without chemicals that tackles the cause (moisture) at the root.

Sparsam & effizient

Mold-DRY has a very low energy consumption, which can be further reduced considerably by plugging in a timer switch. Furthermore, the generated heat in the room is not lost. Likewise, a dry wall insulates significantly better than a damp one, so Mold-DRY also helps you save energy incidentally.

Infrarot Kerntrocknung

The infrared rays warm the wall core and combat the mold in a targeted and sustainable way. This method completely dries out the walls and thus prevents new mold growth. Dry wall – mold banished.

Gesund & chemiefrei

Mold-DRY not only protects against visual defects and unpleasant odors, but also reduces health risks such as respiratory problems and allergies. The conscious avoidance of chemicals is furthermore a factor for more well-being in one's own four walls and a healthy indoor climate.

Nachhaltig & dauerhaft

The intensively researched technology of Mold-DRY is the simplest solution against mold. Since the mold is killed not only on the surface but also deep in the masonry, this method guarantees a permanent and very easy-to-apply alternative to conventional mold removal.

Mold-DRY is the solution

How it works

Mold - DRY revolutionizes mold removal. Through the innovative infrared technology, the masonry is deeply, sustainably, and thoroughly dried, thereby permanently removing the moisture that causes mold. This is done entirely without the use of chemicals, making this method particularly environmentally friendly and health-compatible.

Mold - DRY is also easy to install and therefore the ideal solution for your home. Simply effective against mold fungi!

Mold is that easy to remove

Unpack, plug in, and live mold-free!

  • 01

    assemble

    Mold - Mount dry to the wall with the enclosed dowels and screws, or place in front of the moldy wall with the feet.

  • 02

    plug in

    Plug in Mold-Dry and let it run 24/7 at the beginning. Depending on the wall moisture, the drying time varies between a few weeks and months

  • 03

    better living

    Long-term protection against mold.

    Mold - DRY not only ensures dry walls but also prevents renewed mold infestation.

YOUR KEY TO A MOLD-FREE HOME

Mold - DRY

To the shop

Häufig gestellte Fragen

Schimmel ist gefährlich – und entsteht oft unbemerkt!

How much electricity does Mold-DRY consume per day?

A Mold-DRY Unit with 50 Watt (+/-10%) requires about 1.2 kWh of electricity in 24 hours at full operation. (+/-10%), comparable to a conventional 50 watt light bulb.

When operated with a timer after the first drying phase, the consumption is reduced accordingly.

Why does Mold-DRY save more energy than it consumes?

  • Energy remains energy!

The heat produced by Mold-DRY is not lost in the room and exactly this heat means your main heating system has to heat less.

  • However, there is still one essential point – the SAVING of energy!

Damp walls not only form the breeding ground for mold, they are also bad for the indoor climate and increase heating costs.
Due to increased moisture content in the masonry, the natural insulation capacity changes and the increasingly expensive purchased heat energy escapes uselessly through the damp walls. The moisture causes the masonry to act like a heat conductor, as water conducts energy up to 28 times faster than air.
As a rule of thumb, it can be said that with a moisture content of only 4%, the insulation capacity is already reduced by half. At 10%, the thermal insulation value is even only a quarter, which massively increases heating costs.
With every percent more wall dryness through Mold-DRY, you not only prevent mold, you also save heating costs and thus real money.

For which building materials can Mold-DRY be used?

Mold-DRY dries every diffusion-open building material superficially and deep into the capillary action with infrared heat.
It also dries every damp surface touched by the infrared heat and the rising warm air. This also minimizes the possibility of new mold spores forming and also reduces the formation of condensation on walls and windows.

Wieviel Fläche trocknet ein Heizelement und wieviel Elemente brauche ich?

For higher humidity or greater mold infestation, one module is required per running meter of wall (which is why there are also cheaper set offers).
If you place a Schimmel-Dry heating element horizontally near the floor, it dries damp walls through capillary action over about 1 meter of wall width and the entire wall upwards to about 2.5 – 3 meters room height.

At corners, always install 2 modules (left and right side) so that the drying can penetrate deep into the corner.

For slight humidity or light mold infestation, one module is sufficient per 1.5 running meters.

Wie viele Einheiten kann ich kombinieren und wie viele brauche ich?

Das Basismodul (M1) kann mit bis zu vier Erweiterungsmodulen (M2) kombiniert werden. Die benötigte Anzahl hängt von der Schimmelgröße und der Raumfläche ab. Eine Faustregel: 1 Modul deckt ca. 1m² Fläche ab.

Flexibel erweiterbar für jede Raumgröße!

Does Mold - DRY remove mold completely?

Yes! The mold dies from drying and can then simply be wiped off. Since the moisture is removed from the wall, no new mold can form.

Noch Fragen?
Markus ist da, um dich zu unterstützen und zu beraten.

Mo - Do: 09:00 - 16:00 Uhr

Fr: 09:00 - 13:00 Uhr

+49 6187 9033960

info@schimmel-dry.com

Put an end to mold!

With Mold-DRY you remove your mold and simply & healthily prevent future mold formation.

JETZT SCHIMMEL - DRY ENTDECKEN