Damp walls

An invisible danger

Damp walls are a common problem in many households. They often arise from water damage, incorrect heating, poor ventilation, leaks or inadequate sealing (especially external sealing), all of which should be repaired. If the moisture is not addressed properly and immediately, it can penetrate deep into the masonry and cause mould, which later appears on the surface.

Mould, Health Risks & Remediation

The problem of damp walls

Damp walls can bring various problems. They promote mould growth, impair the building structure, increase heating costs, and can spread unpleasant odors. The moisture increases the humidity in the room, which encourages the growth of microorganisms, causes plaster to crumble, peels wallpaper, and can even cause metal parts to rust. These damages can not only significantly impair the building structure but also cause high repair costs and pose health risks.

  • Mould growth is promoted.

    If a wall is damp, mould formation can begin quickly. Therefore, it is advisable to react quickly after water damage and to dry the wall out again.

  • Damages the building fabric

    Moisture not only penetrates the walls but can also attack the building's structure. Wet walls are therefore a danger to your house. A horizontal seal can already provide initial relief.

  • Increases heating costs

    A soaked masonry conducts heat quickly to the outside. Since water conducts energy up to 28 times faster than air, heating costs rise rapidly.

That's why mould forms.

Causes of damp walls

Damp walls can have many triggers. The most common causes of damp walls include leaking roofs, rising moisture, defective water pipes, inadequate drainage, poor ventilation, insufficient seals, and condensed humidity. Construction defects and flooding can also lead to moisture in the masonry, which must be treated through drying out. A precise cause analysis is crucial to take appropriate measures for moisture removal. "If you wait too long, damp walls will need to be renovated. Therefore, make sure to dry out all the moisture in the masonry to avoid renovation. Furthermore, you can install a horizontal barrier to prevent moisture from rising and pay attention to cross-ventilation to prevent humidity from increasing further."

Naturally & permanently

How does Mould-DRY work?

Mould - DRY revolutionizes mould removal. Through the innovative infrared technology, the masonry is deeply dried, thereby permanently removing the moisture that causes mould. This is done entirely without the use of chemicals, making this method particularly environmentally friendly and health-compatible.

Mould - DRY is also easy to install and therefore the ideal solution for your home. Simply effective against mould fungi!

Discover Mould-Dry Now

Eliminate mould and effectively prevent it!

Infrared drying

Heats the wall specifically with infrared radiation, so that moisture is transported from the depths to the outside.

Eliminates moisture

Capillary-active moisture release

Activates the natural evaporation of water in the wall and prevents new moisture from coming in.

Causes persistent drought

Chemical-free mould prevention

Safe for households with children, allergy sufferers, and pets – a sustainable and healthy solution.

Healthy & environmentally friendly

Energy-efficient heating concept

The heat is specifically directed into the wall, without unnecessarily warming the room air – efficient and cost-saving.

Maximum effect + minimal costs

Mould-Dry in Comparison

Mould-DRY competition Chemical agents
Sustainable Mould Control

Permanent solution through wall drying

Permanent solution through wall drying

Kills mould temporarily without addressing the cause.
Prevents new mould formation

Yes, by removing moisture in the long term.

Only as long as the device is running

No, because moisture remains.
Chemical-free & health-friendly

100% chemical-free, safe for children & pets

Yes, but often associated with noise & power consumption.

Contains toxic substances, irritates respiratory tract & skin
Energy consumption & costs

Only 45–50W, extremely efficient

High power consumption, ongoing costs

One-time low costs, but repeated application needed
Silent & maintenance-free

Yes, completely silent & no maintenance needed

Loud & requires regular maintenance

Yes, but repeated application necessary
Long-term solution

Yes, moisture will be permanently reduced.

Only short-term effect, as soon as the device is off.

No, only superficial effect
Simple application

Plug & Play, simply attach & connect

Often heavy & bulky, requires space

Simply spray on, but regularly needed.

Sustainable, healthy, and efficient.

Order directly from the manufacturer and secure 18%! Discount code: MOULD18

DISCOVER MOULD-DRY NOW

Your key to a Mould-Free home

Mould-Dry

To the shop

frequently asked Questions

Detailed answers to the most frequently asked questions

How long does it take for the mould to disappear?

The first effects are often visible after just a few days. Depending on the level of moisture, it takes 4–6 weeks for the mold to be completely dead and can be removed in a health-friendly manner.

Subsequently, Mould-Dry prevents reformation in the same areas.

Can I use Mould-DRY in every room?

Yes, the device is suitable for living rooms, bedrooms, basements, bathrooms, and even storage rooms. The only important thing is that it can be connected to a power source.

Ideal for all rooms with moisture problems!

How complicated is the installation?

The installation is incredibly simple: Attach to the wall (screws or mounting adhesive) and plug it into the socket – done! No specialist knowledge or renovations required. Simple plug & play installation!

In the included manual, you will find a simple step-by-step guide.

Can I use Mould-DRY in rental apartments?

Yes! The device can be attached with mounting adhesive and removed without residue. Since mould poses a health risk, many landlords are open to solutions like Mould-DRY.

Perfect for rental apartments – no structural changes needed!

How high is the energy consumption and can it run continuously?

Mould-DRY consumes only 45–50W, which corresponds to less than 3€ electricity costs per month. It is designed for continuous operation until the wall is completely dry.

Energy-saving & suitable for long-term use!

Is Mould-DRY safe for children and pets?

Yes! Mould-DRY works completely without chemicals, is silent, and does not produce harmful fumes. The maximum surface temperature is 60–70°C, which is hot enough for effective drying but safe in normal living spaces.

100% safe for the whole family!

Do I need to remove the mould from the wall beforehand?

No, Mould-DRY first dries out the mould so that it can be removed without spore release. After drying, it can be easily removed.

Does Mould-DRY remove molud completely?

Yes! The mould dies off due to drying and can then simply be wiped off. Since the moisture is drawn out of the wall, no new mould can form.

Are there scientific studies that prove the effect?

Yes, Mould-DRY is based on proven infrared drying technology used in building physics and building protection. Studies show that mould can be effectively removed through targeted drying and that reformation is prevented.

How many units can I combine and how many do I need?

The basic module (M1) can be combined with up to four extension modules (M2). The required number depends on the mould size and the room area. A rule of thumb: 1 module covers approximately 1m² of area.

Flexible expandable for any room size!

Still questions?
Markus is here to support and advise you.

Mon - Thu: 09:00 - 16:00 PM

Fr: 09:00 AM - 01:00 PM

+49 6187 9033960

info@schimmel-dry.com

Put an end to the mould!

With Mould-Dry, you can eliminate your mould and easily and healthily prevent future mold growth.

DISCOVER MOULD-DRY NOW